A defective Lens Motor M6 (C0610) is detected under any of the following
timings:
The output from Lens Reference Position
Sensor PC90 does not go LOW within
approx. 15 seconds after M6 has been
energized while the PC90 output was
HIGH.
The output from PC90 does not go HIGH
within approx. 10 seconds after M6 has
been energized while the PC90 output
was LOW.
1139T24MCA
M6
PC80
about 15sec
1139T25MCA
M6
PC80
about 10sec
A defective Mirror Motor M7 (C0620) is detected under any of the following
timings:
The output from Mirror Reference
Position Sensor PC86 does not go LOW
within approx. 10 seconds after M7 has
been energized while the PC90 output
was HIGH.
The output from PC86 does not go HIGH
within approx. 3 seconds after M7 has
been energized while the PC86 output
was LOW.
A defective AE Sensor Board PWB-H (C0F10) is detected under the
following timing:
*
The PWB-H output voltage sampled in the F5 operation does not fall
within the range between 2.0V and 4.2V.
1139T26MCA
M7
PC86
about 10sec
1139T27MCA
M7
PC86
about 3sec
M-45
To Next Page
Loading...
