17-4. Drawer-in-Position Detection
The copier detects that the Drawer is slid into position as follows.
1st Drawer
When the 1st Drawer is slid into the copier, the Drawer Frame presses 1st
Drawer Set Detecting Switch S65 installed on the back panel of the copier.
2nd Drawer
When the 2nd Drawer is slid into the copier, the Rib on the Drawer Frame
blocks 2nd Drawer Set Sensor PC69.
Drawer Frame
Paper Size
Detecting Switches
1st Drawer Set
Detecting Switch S65
S61 S62 S63
1139C09MAA
2nd Drawer Set Sensor PC69
Rib
M-59
To Next Page
Loading...
