2. Detailed Instructions for Indicator Lights
Charging the Copier with Starter and Toner
4445U006AA
Swing out the Bottle Holder.
1
1139O1410A
Hold the Starter Bottle so that its
tab is on the upper side, shake it
well.
2
4445U007AA
Peel off the tape from the Starter
Bottle.
Align the markings on the
Starter Bottle with the upper side
of the Bottle Holder and slide the
Bottle into position.
3
4445U006AA
Then, swing in the Bottle Holder
until it locks into position.
4
Insert the Bottle all the way
into the copier until the
marking on the Bottle is
aligned with the marking
on the Bottle Holder.
NOTE
Chapter 5
When an Indicator Lights Up
126
To Next Page
Loading...
