Minolta EP4000 - Page 246

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-22
Tech. Rep. Mode " Tech. Rep. Choice
Touch Panel Display Operation
Leading Edge Erase Select whether to enable (“Yes”) or disable (“No”) the leading edge erase.
NO
YES
Trailing Edge Erase Select whether to enable (“Yes”) or disable (“No”) the trailing edge erase.
NO
YES
Loop Adjust (Drawer) Adjust the length of the loop before the Synchronizing Rollers to be formed
in paper fed from the copier drawer.
Display Description
47
48
49
50
Loop length approx. 1 mm
Loop length approx. 3 mm
Loop length approx. 5 mm
Loop length approx. 7 mm
Display Description
51
52
53
Loop length approx. 9 mm
Loop length approx. 11 mm
Loop length approx. 13 mm
Loop Adjust (Man) Adjust the length of the loop before the Synchronizing Rollers to be formed
in paper fed via the Multi Bypass Tray or a paper feeder option.
Display Description
47
48
49
50
Loop length approx. 1 mm
Loop length approx. 3 mm
Loop length approx. 5 mm
Loop length approx. 7 mm
Display Description
51
52
53
Loop length approx. 9 mm
Loop length approx. 11 mm
Loop length approx. 13 mm
Function Limit Select whether to limit (“ON”) the functions that can be set on the control
panel or not (“OFF”).
ON
Functions that can be set are limited to the
number of copies to be made, paper size,
zoom ratio, and exposure level only.
OFF All functions can be set.