Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-45
(9) Replacement of the Starter
1136D157AA
2. Turning the Bucket Roller, pour fresh starter evenly into the chamber.
NOTE
Shake the packet of starter well before opening it.
NOTE
When the starter has been replaced, reset the count of “Starter” of the “Port/Option” counters of the
Tech. Rep. mode and then make the ATDC adjustment. (For the ATDC adjustment, see p. D-69.)
1134D051AA
1. Dump the developer out of the Developing Unit.
To Next Page
Loading...
