Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-25
1156SBS050404A
4. Counter
D This function shows the counts of the various counters, thus aiding the Tech. Rep. in performing service
jobs.
<Setting Procedure>
1. Select “Counter”.
2. Select the desired counter function.
3. Clear or set the count according to the instructions given on the screen.
<Clearing All Counts of a Counter Type at Once>
1. Touch the “Counter Reset” key.
2. Select the type of counter to be cleared all at once.
3. Touch “Enter”. This clears all counts of the counter selected.
Tech. Rep. Mode " Counter
Touch Panel Display Operation
Paper Shows the number of copies made on each paper size or type (S0: stan-
dard paper; S1: recycled paper; S2: special paper; S3: disabling 2-sided
copying).
<Paper 1/2>
Paper Size
A3 11 X 17
B4 11 X 14
A4 Legal
B5 Letter
A5 5½X8½
FLS
Paper Type
S0
S1
S2
S3
<Paper 2/2>
Note: For a paper size that can be
loaded both lengthwise and
crosswise, the count repre-
sents the sum of both. (Ex.:
A4 lengthwise/crosswise)
<Clearing a Count>
Using the B or Y key, highlight the count to be cleared, then press the
Clear key.
Note: If a count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
To Next Page
Loading...
