D-24
1136D104AA
1136D105AA
(12) Disassembly of the Multi Bypass Unit
1156D033AA
1156D034AA
1156D035AA
5. Remove three Suction Belts.
6. Remove the Suction Roller as shown on the left.
1. Open the Right Door.
2. Remove two screws and the cover.
3. Remove the harness from one locking wiring saddle.
4. Unplug three connectors.
5. Remove two screws and the Right Door.
NOTE
The Right Door must be adjusted for correct position when
it is reinstalled. (See p. D-101.)
6. Remove four screws and the Separator Guide Plate Assy.
To Next Page
Loading...
