D-43
(8) Replacement of the Cleaning Blade
1136D172AA
1138D321AA
1136U013AA
1136D303AA
1. Remove and replace the Cleaning Blade.
2. Remove the Toner Bottle from the IU. Insert a brush
through the toner port and into the toner.
3. Apply toner to the entire surface of the new Cleaning
Blade.
NOTE
Be sure to apply toner to both end faces of the
Cleaning Blade.
4. Using the brush, apply lubricant shipped with the Cleaning
Blade to the two side seals shown.
To Next Page
Loading...
