14 15
BASIC OPERATION
INSTALLING BATTERIES
The Macro flash controller MFC-1000 may be powered by:
• Four AA-size alkaline batteries
• Four AA-size lithium batteries
• Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Always ensure that rechargeable nickel-metal hydride batteries are
charged in the proper charging unit.
1. Open the battery-chamber door as shown.
3. Close the battery-chamber
door.
• The indicator lamps on the control
panel should light. If not, press the
flash on/off button.
2. Insert the batteries according
to the diagram in the battery
chamber.
To Next Page
Loading...
