Minolta MAXXUM 3xi - Page 19

3. Close the back cover and move
the main switch to ON. The camera
will automatically advance the film ^
to the first frame and 1 will appear in W
the film counter.
■
'
P
n
%
AUTO
u
.
AUTO
0-_j)
• If the film is loaded incorrectly, 0 will blink in the
frame counter and the shutter will remain locked.
Open the back cover and repeat steps 2 and 3.
• If you move the main switch to ON before you load film, do not touch the
grip sensor during the above procedures because ASZ may activate.
• If you accidentally open the back cover before you rewind the film, quickly
shut the back. The counter will reset to 1. Some of the pictures you have
already taken will be ruined or will be discolored along the edges.
17