Minolta Maxxum 8000i - Multiple Exposure.50

To set an exposure adjustment:
1. Press in the exposure-adjustment button.
2. While keeping the button held in, move the
setting control to the right for increased expo¬
sure adjustments, and to the left for decreased
exposure adjustments. The adjustment range
is ± 4 stops, and is set in half-stop increments.
Whenever an exposure adjustment is set, the -
or + signal will appear in viewfinder and data
panel. The actual adjustment can be confirmed
at any time by pressing the exposure adjustment
button.
Remember to reset the exposure adjustment
to ± 0.0 when you're through using it; oth¬
erwise, subsequent exposures will be over-
or underexposed.
49
MULTIPLE EXPOSURE
The 8000i's multiple-exposure function enables
you to expose a single frame two or more times.
Used skillfully, it is a technique that can lead to
unusual and pleasing images.
To set multiple-exposure operation:
While holding in the FUNC and MODE buttons,
slide the setting control in either direction. ME
will appear in the data panel to indicate that the
camera is set for multiple exposure operation.
If you change your mind after setting the
camera for a multiple exposure, it can be
easily canceled by repeating the setting pro¬
cedure.
50