Minolta MN5Z - Protect

61
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
when viewed on Playback mode.
To protect files:
1. From the Playback menu, select Protect
.
2.
The Protect submenu is displayed on the
LCD monitor.
Available select settings:
x Single. Select one file to lock/unlock.
x Multi. Select multiple files from the
thumbnail view to lock/unlock.
x Lock all. Lock all files
x Unlock all. Unlock all files.
To protect/unprotect a single file:
1. Select Single
in the Protect submenu, the
images are disp
layed on the LCD monitor in
single navigation mode.
2. Use
or keys to scroll the display.
3.
When the desired file is displayed on the
LCD monitor, press the OK
button to select
Lock/Unlock.
4.
To close the protect/unprotect function and
go back Playback menu, select Exit.
To protect/unprotect multiple files:
1.
Select Multi in the Protect submenu, the
images are displayed in thumbnail view on
the LCD monitor.
2. Use the
or keys
to move through the
files.
3.
When the desired file is highlighted, use the
or keys
to mark/unmark the file for
protection.
4.
Repeat step 3 until all desired files to protect
are marked.
5. Press the OK
button to lock files and go
back to Playback menu.