7
Working with the printer
7-8
7.3 Loading paper
Loading paper into paper feed tray 1
Paper feed tray 1 has a capacity of 150 sheets of plain papier.
Please note the following points:
Only refill the tray when it is completely empty.
Refer to the advice on loading paper, see chapter 7.
1
Press the right-hand paper guide
together in order to release the
guide. Slide the guide outwards as
far as it will go.
?
Using a large paper format?
→ Then extend the paper support.
2
Place the paper between the paper
guides. Slide the guides up to the
stack of paper.
?
How many sheets may I place
on the tray?
→ The stack of paper should not
rise above the "m ax."mark.
To Next Page
Loading...
