Unpacking, installing and setting up the printer
2
2-7
2.3 Installing your laser printer
Place of installation
The printer should be set up in a place which is:
dry and free from dust,
on a stable surface,
well ventilated,
well clear of highly flammable items, e.g. curtains,
clear of objects which might obstruct the printer’s ventilation slits,
near to an easily accessible power socket.
The printer must be positioned such that it cannot be adversely affected
by the following:
splashing liquids,
organic gases, e.g. ammonia,
direct sunlight,
severe temperature fluctuations,
exhaust-air from heating, ventilation or air-conditioning systems.
Storage of consumables and accessories
Printing consumables and accessories should be kept:
sealed in their original packagings,
protected against direct sunlight or heat,
protected against fluorescent light,
in a cool, dry and dust-free place,
out of reach of children.
CAUTION
Toner poses a health hazard!
Toner is harmful if swallowed.
→ If you swallow toner, consult a doctor immediately.
→ If you get toner on your hands, wash them immediately with cold water
and soap.
To Next Page
Loading...
