Minolta PagePro 1100 - Adjusting the Print-Out to Fit the Paper; Specifying the Orientation of the Print Paper

Working with the Windows printer drivers
4
4-7
Adjusting the print-out to fit the paper
Use the “Fit to paper“ function to fit your document to a certain paper size
when it is printed. Your document will be automatically enlarged or
reduced so that it will fit on the paper size you have selected.
The “Fit to paper“ function cannot be used at the same time as the “N-Up“
or "All raster" functions.
1
Activate the checkbox “Fit to paper“.
This activates the dropdown list underneath.
2
From the dropdown list that is now available, select the paper size on
which you would like to print.
3
Confirm your entries with [OK].
Specifying the orientation of the print paper
Under “Orientation“ you can specify whether your document should be
printed in portrait (vertical) or landscape (horizontal) format.
A
A
Portrait
Landscape