2-19
Chapter 2Setting-Up
Options
Installing the Second Paper Cassette Unit
1
Remove the second paper cassette unit and Tray2 from their
packaging, including the protective tape used to hold the various
components in place.
2
Place the printer on top of the base unit. Make sure to align the
coupling pins of the base unit with the holes located underneath
the printer.
3
Load paper onto Tray2. See “Loading Paper onto Tray2
(Option)” on page 3-13 for details.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
