3-1
Chapter 3Using the Printer
Using the Panel Button
Using the Panel Button
The panel button can be used to perform various operations according
to the status of the printer.
Counter Reset Mode
Use the following procedure whenever you want to reset the counter.
1
Turn off the printer.
2
While holding down the panel button, turn on the printer.
3
Keep the panel button held down, and the Ready indicator will
start to blink. After the Ready indicator has blinked for about 5
seconds, release the panel button. This should cause all the
indicators to start to blink.
4
After all the indicators blink, the printer enters the counter reset
mode. See “To Reset the Counter of the Toner Cartridge” on
page 6-6 and “To Reset the Counter of the Drum Cartridge” on
page 6-14 for details.
Panel button
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
To Next Page
Loading...
