Minolta VECTIS WEATHERMATIC ZOOM - Date and Time Imprinting; Selecting Print Imprinting Options

41
DATE IMPRINTING
40
REWINDING THE FILM
Manual Rewind
Use manual rewind when you want to remove the film before exposing the last frame.
1. Turn the control dial to .
2. Press the date/select and self-timer/adjust buttons at
the same time.
• The camera will start to rewind the film.
3. Follow steps 1 - 3 from automatic rewind.
Your camera uses the film’s magnetic data strip to record date and time information your
photofinisher can imprint on the front and back of your photographs.
Imprinting the Date or Time
Before taking the picture:
Press the date/select button until the data you want
printed on the front of the print appears in the data
panel.
• The sequence is: DATE → TIME → -- -- -- (no imprinting).
• The selected date/time mode will remain on until another mode is
selected.
• When -- -- -- is displayed in the data panel, no data will be printed on
the front of the print, but the date and time of the exposure will be
imprinted on the back of the print.
Note: Film cannot be reloaded after it has been rewound.
Note: Some labs can not imprint on the front of your photographs. See your photofinisher
for a full description of available services.
2208_E 24/10/97 10:30 AM Page 40