Minolta X-300 - Rewinding and Unloading Film

REWINDING
AND
UNLOADING
FILM
1.
Press
the
rewind
camera
bottom.
release on
the
u
:"*":
ff
2. Unfold the
rewind crank
-and
ffi
turn
it in
the direction of the arrow
until
the red
bar
in the
Safe
Load
Signal
moves
out
of the
window
to
the
left.
Near the
end,
you
will
feel
tension of the
film increase
then
completely
disappear,
and the
crank
will
then turn
freely.
3. When
you
are certain
that
the
exposed
film is completely rewound
into the
cartridge,
pull
up
on the
back-cover
release
knob to
open
the
back, then remove the
film car-
tridge.
o
Never
open
the
camera
back
when there is any
red
still
visible
in
the
Safe
Load
Signal.
23
www.orphancameras.com