Minolta X-300 - Page 10

[4] Adjustment of A-auto level, check of LED indication
Mi
Measuring
instruments
:
Luminance
box
(Model
L-2101,
L-222,
L-223)
: EE
tester
(Model
EE-2101,
EE-2111)
: SS
adaptor
for
EE
tester
(Model
SD-2101)
: Master
lens for
S-auto
(2005-0001-75)
Hi Adjustment procedure
1. Set the camera and measuring instruments as follows.
@ After setting the master lens, turn it counterclockwise to put aside the looseness to. one
side.
Fig. 1 Master lens for S-auto
Luminance box
EE tester
® Luminance box ® Camera @ Master jens @ EE tester ® SD-2101
K value: 1.2 Shutter dial: A Aperture: F 5.6 K value dial : 1.2 Aperture switch: F 5.6
* Luminance: EV 10. 15 ASA: 100 Distance : = ASA dial: 100 Luminance switch: Same as
luminance
box.
% When using luminance box (L-222 or L-223). set it at EV 11, and use a ND filter (MINOLTA
ND50% FOR ADJUSTMENT). ‘
2. Adjust and check as follows:
Shutter speed | EE level Indication allowable range
i adjusted
ae 5 ae adj ustment allowable range oo (+0. SEV)
1/60 | (co | a
1 EV 10 34 ms — VR. (Fig.2) | 1/30 | (ceo2 | cot] oo
Vis | = = | io
2 EV 15 —_ +0. 4EV (Check only)
HiFig. 2