Minolta X-370N - Shutter Speed Control

There are two ways to do th is:
. First set
the shutter speed selector
at the desired click-stop, then
turn the aperture ring until no
LEDs light up
other than the LED
blinking
next to the selected
speed.
• First set
the aperture as desired,
then turn the shutter-speed selec-
tor so that the blinking LED
matches up with
the glowing
LED.
If two LEDs are glowing,
adjust
the aperture ring slightly so
only one glows. Do not set the
shutte r speed between click-stops.
Long
exposure at "S" setting
When
the mode/shutter-speed se -
lector
is set at "S", the shutter will
open when you press the shutter-
release button and remain open
until you release the button . This
makes
exposure longer than one
second possible. A tripod or other
firm support should generally be
used.
The eyepiece cap (p . 22) should be
used to prevent stray light from
affecting the exposure.
NOTE
• The self-timer does
not operate at
the " S" setting.
• With fresh batteries
at moderate
temperatures, the maximum long
exposure is approx . 10 hours. At
lower temperatures, exposure time
may be sh orter.
27