Minolta XG-7 - Page 13

ATTACHING
AND
REMOVING
LENSES
To Attach
1.
Remove
the
body cap f rom
the camera lens
mount
and the rear
cap from
the lens
bayonet, each
by
turning
the cap counter-
clockwise.
2.
Align
the
red
mounting
index
on
the lens
barrel with
the red
index
above the camera
lens mount;
insert
the lens
bayonet into
the
mount;
and turn
the lens
clockwise until
it
locks
into
place
with
a
click.
To Remove
While
pushing
the lens-release
button,
turn
the lens
counterclockwise
as far
as it will
go;
then
lift
the lens
bayonet
out of the mount.
CAUTION
lf
it becomes
necessary
to
set the lens
down
without
a
rear
lens
cap
attached, be
sure to
set
the lens
only
on its f ront
end
(except
f
or
fisheye
lenses)
as
damage
to the diaphragm
control
pin
could result
from rear
lens contact
with
a
hard
surface.
www.orphancameras.com