36
Checking the battery level
Switch your DTC 400 to the “Setup mode” (main switch
(12) top position). Using the down arrow key (11), select
the menu option “Photo/video playback” and confirm
this by pressing the OK button (11). The battery level
will be shown in the top left area of the LCD display (6).
Another way to check the battery level is by selecting
the menu option “Camera info” using the up/down
arrow keys (11) and confirming with OK (11). In the
submenu the battery charge level is displayed as a
percentage.
Note: We recommend using high efficiency batteries
for optimum performance. You can prolong battery life
if you create shorter video sequences.
Note: The battery status LED (4) is activated when the
battery starts to run out.
Installing the memory card
You need a memory card (SD/SDHC card) in order to store
images or video clips. Your DTC 400 camera supports
memory cards of up to 32 GB.
Insert the memory card into the memory card slot (15) with
the brass coloured contacts toward the inside of the cam-
era. Ensure that the SD card is not write-protected (SD card
slider is not in the “lock” mode). Switch your DTC 400 to
the “Setup mode” (main switch (12) top position). When
your DTC 400 camera shows “No SD card” in the display,
To Next Page
Loading...
Need help?
General
