38
Setup and operating mode
Your camera has two mode settings:
1. Setup mode
Switch your DTC 400 camera to the “Setup mode” (SETUP
= setup mode, main switch (12) in top position). In this set-
ting you can adjust the programming of the camera as well
as all display settings such as date, time, temperature etc.
that are to be later displayed on the photos or video clips.
2. Operation mode
Switch your DTC 400 camera to “operating mode” (ON =
operation mode, main switch (12) in bottom position). In
this mode, your DTC 400 camera automatically accepts
the new settings which you previously programmed in
the “Setup mode”.
Note: The red activating LED (5) will blink for a few
seconds before the camera is ready for use and you
will see the actual shooting area on the display screen.
Menu functions and settings
Preview
In the main menu, go to the menu option “Live Preview”
and press the OK button (11). This option allows you to
display a current image on the LCD display (6) of your
DTC 400 camera (3). The function is useful for align-
ment of the DTC 400, since you can identify the shooting
To Next Page
Loading...
Need help?
General
