45
without having to make a selection. No formatting of the
SD card will be undertaken.
Default factory settings
With this menu option, you can restore your DTC 400
settings to factory settings. In the main menu, select the
menu option “Default settings” and press the OK button
(11). You can select “Yes” or “No” using the up/down
arrow keys (11) and confirm with OK (11). Select “No” to
retain the existing settings and the camera will return to
the main menu. If you choose “Yes” and confirm with OK
(11), your DTC 400 will be restored to the factory settings
and revert to the main menu. By pressing the menu but-
ton (13) you will be returned to the main menu without
having to make a selection. The camera will retain the
current settings.
Language
To change the language setting of your DTC 400, please
follow these steps:
1. In the main menu, select the menu option “Language”
using the up/down arrow keys (11).
2. Confirm with OK (11).
3. Using the up/down arrow keys (11), select the desired
language (highlighted).
4. Press the OK button (11).
5. The camera has now saved the language you have se-
lected and you are returned to the “Main menu”.
Note: By pressing the menu button (13) you will be
returned to the main menu without having to make a
selection. The camera will retain the current language.
To Next Page
Loading...
Need help?
General
