Weekday
(english abbreviation)
Temperature
Date
(in format month – day)
Setting date and time
Press the set button and hold
for at least 1.5 seconds to change
the set time and date. At the
bottom of the display window
shortly the word “SET” appears
and you enter the time setup
display.
By pressing the up- or down
buttons the flashing display
of the hours can be set. To con-
firm your entry press the mode
button. This automatically
leads you to setting the minutes.
Set the minutes in the same
procedure like setting the hours
and repeat this procedure also for
the seconds, the year, the month
and the time format (24 h/12 h)
subsequently. For completion of
all settings press the set button
to confirm your entries and you
get back to the TIME-mode.
You can also directly confirm your
single entries by pressing the set
button which will then get you
back into TIME-mode.
44 Functions 45
To Next Page
Loading...
General