EasyManua.ls Logo

Minwa Electronics MW3398 Quick Start Guide

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MINWA (CHINA) ELECTRONICS CO., LTD
Page 1 of 2
Minwa (China) Electronics Co., ltd
Minwa Industrial Building, Epoch Park, Buji
Shenzhen, 518112, China
MW3398
Function
This is a versatile charger that can charge, discharge and check rechargeable Ni-Cd and
Ni-MH batteries. There is a built-in lamp to indicate the strength of the battery being
checked. It can be used with a combination of 1-4 pcs of cells of the following type:
Micro AAA, Mignon AA, Baby C, Mono D. It can be used to charge 1-2 pcs of Block
9V batteries.
Technical Specification:
Input Voltage: 230V AC 50Hz
Charge Current: 120mA for AAA, AA, C and D size batteries
13mA for 9V batteries
Operating Instruction:
1) Insert the AC power supply cord into mains.
2) For Charging: Switch the function switch on the unit to charge” position. The
individual red LED will light up when batteries are inserted into the corresponding
slot to indicate charging is in progress.
3) For Testing: Switch the function switch on the unit to the test” position. The red
LED in the first slot (closest to the function switch) will turn off. Insert the battery
to be tested into the first slot. The lamp will indicate the strength of the battery.
Batteries at other slots will continue to be charged.
4) For Discharging: Switch the function switch on the unit to the “discharge” position.
(Please note that this charger can not discharge 9V batteries) All the red LEDs
(with the exception for the ones for the 9V batteries) will go off to indicate
batteries are in discharge mode.
5) Please note that this is not an automatic charger. The charger does not switch to
charge mode automatically after discharge. To check if the batteries are fully
discharged, use the “test” feature.
Warning
1) Do not charge non-rechargeable batteries.
2) For indoor use only.
3) If the external flexible cable is damaged, it shall be replaced by the manufacturer or
his service agent or a similar person in order to avoid a hazard.
4) This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children

Other manuals for Minwa Electronics MW3398

Question and Answer IconNeed help?

Do you have a question about the Minwa Electronics MW3398 and is the answer not in the manual?

Minwa Electronics MW3398 Specifications

General IconGeneral
Output VoltageDC 1.4V
Charging Current (AA)200mA
Charging Current (AAA)100mA
Number of Charging Slots4
InputAC 100-240V, 50/60Hz
Battery CompatibilityAA, AAA NiMH/NiCd
Protection FeaturesOvercharge protection