To Next PageTo Next Page
Need help?Do you have a question about the Mirabelle Edenton MIRED8030GCP and is the answer not in the manual?
This document describes the Mirabelle Edenton single handle tub & shower trim, a plumbing fixture designed for both aesthetic appeal and functional performance in bathrooms. The trim is available in various finishes, indicated by different model numbers, including polished chrome (MIRED3030GCP), brushed nickel (MIRED3030GBN), and oil-rubbed bronze (MIRED3030GORB), among others.
The Edenton single handle tub & shower trim is a complete system for controlling water flow and temperature to a bathtub spout and a showerhead. It features a single handle for easy adjustment of both water temperature and volume. The design includes a diverter on the tub spout to switch water flow between the tub spout and the showerhead. This trim is designed for new installations or as a replacement for existing fixtures, providing a cohesive look and consistent performance for the tub and shower area.
The trim is compatible with 1/2" copper pipe (5/8" OD) for tub spout installation. The distance from the valve to the tub spout stub out should be between 8" (20 cm) and 18" (45 cm). The installation requires a 1/2" NPT or 1/2" copper pipe connection for the tub spout. The product is engineered to meet the EPA WaterSense flow requirement, ensuring water efficiency with a flow rate of 1.51 GPM (5.7 L/min) or less. This means the product is designed to conserve water without compromising performance. The valve cartridge is a critical component, and if leaks occur, it may need to be tightened or replaced. The showerhead is designed for a flow rate of 1.51 GPM (5.7 L/min) or less.
The single handle operation simplifies water temperature and volume control. The tub spout includes a diverter, allowing users to easily switch water flow from the tub spout to the showerhead. The trim is designed for ease of installation, with clear instructions provided for various pipe types, including threaded and copper pipes. For copper pipe installations, a set screw on the tub spout secures it to the stub out pipe. For threaded installations, pipe tape is recommended to ensure a watertight seal. The design aims for a clean, integrated look in the bathroom, with components like the escutcheon and trim ring covering the rough-in plumbing.
The faucet is designed for years of trouble-free performance. To maintain its appearance, it should be cleaned periodically with a soft cloth. Abrasive cleaners, steel wool, and harsh chemicals should be avoided as they can dull the finish and void the warranty. The manual includes a troubleshooting guide for common issues such as leaks underneath the handle, leaks from the spout, and dripping from the showerhead. For leaks underneath the handle, the cartridge may need to be tightened or replaced. If the spout leaks, the O-rings or cartridge may be dirty or twisted. For a dripping showerhead, the cartridge may need to be tightened or replaced. The product is designed with a replaceable regulator to ensure compliance with WaterSense flow rates. If the regulator needs to be replaced, it should be done by a qualified plumber. The manual also provides a list of replacement parts, including the handle cap, metal handle assembly, trim ring, sleeve, screw set, escutcheon assembly, shower arm flange, shower arm, shower head, hex wrench, spout escutcheon, and spout with diverter, facilitating easy repairs and maintenance.
General| Brand | Mirabelle |
|---|---|
| Model | Edenton MIRED8030GCP |
| Category | Plumbing Product |
| Language | English |
