Miranda imagestore 750 - Cut A;B; Cut to a; Cut to B; Fade A;B

Front Panel Operations Imagestore 750 User Manual
Page 110 Miranda Technologies Inc.
Cut A/B
Alternatively cuts in the A or B input source from the AB Mixer.
Cut to A
Cuts in the A input source from the AB Mixer.
Cut to B
Cuts in the B input source from the AB Mixer.
Fade A/B
Alternatively fades between the A and B input source from the AB Mixer.
The rate, in fields (1 to 999) is set by the Set Rates, Fade A/B, command.
Fade to A
Fades in the A input source from the AB Mixer. The rate, in fields (1 to 999)
is set by the Set Rates, Fade A/B, command.
Fade to B
Fades in the B input source from the AB Mixer. The rate, in fields (1 to 999)
is set by the Set Rates, Fade A/B, command.
Toggle Silence
Alternatively swaps between program output and silence. The rate, in fields
(1 to 999) is set by the Set Rates, Fade to Sil, command.
Fade to Sil
Fades down the output to silent. The rate, in fields (1 to 999) is set by the Set
Rates, Fade to Sil, command.
Fade from Sil
Fades up the output from silent. The rate, in fields (1 to 999) is set by the Set
Rates, Fade to Sil, command.