Imagestore 750 User Manual RCP Operations
Miranda Technologies Inc. Page 207
Voice Overs
Press the Trans soft key.
Press either VO1 or VO2 soft key.
Press the Cut or Fade soft key to
activate the voice over.
The fade rate is shown on the LCD
and controlled via the right hand
rotary pot.
The Duck and Preset levels are also
displayed on screen and controlled
via the rotary pots above each
heading. Note that on entering the
menu the duck and preset rates do
not reflect the last values selected on
the RCP or front panel.
Press the OK soft key to accept the
changes.
To Next Page
Loading...