Installation Imagestore 750 User Manual
Page 272 Miranda Technologies Inc.
The relays link “A IN” to “PGM OUT” and “C/FILL 3 IN” to “PVW OUT”,
as per the table below:
Input Output
A IN relay-bypassed to PGM Out
C/FILL 3 IN relay-bypassed to PVW Out
This bypass functionality is shown on the rear panel silk screen via lines
connecting the BNC legends:
REF IN
This is used to connect an HD Tri-level sync or SD analogue bi-level sync.
Note: Only VITC ANSI/SMPTE standard 12M-1995 may be present
on bi-level sync.
To Next Page
Loading...