Imagestore 750 User Manual Standard Mixfiles
Miranda Technologies Inc. Page 323
Note: For other examples of VO2 shuffles please refer to the previous
section. The physical inputs used for this voice-over vary
depending on which mixfile variant is in use. See page 302 for
more details
Following is an example of setting the shuffle for the external voice-over via
automation. First it is prudent to clear any existing (VO2) shuffles taking care
not to accidentally disable the shuffles that modify Easyplay.
jg220: jg230:
Next the default crosspoints in the matrix are set. The following commands
set the shuffle configuration shown in the previous diagram.
jg225: jg236:
6-channel External Voice-over (Intuition+)
This option allows for 5.1 surround external voice-over insertion. This is
particularly tailored towards receiving audio input from an Intuition+.
The topology for control of the 6-channel voice-over (VO1) is similar to that
used for Easyplay mixfile variants, with control possible on a per-channel
basis. Due to lack of physical inputs, there is no second external voice-over
(VO2) in this mode.
The mapping of external AES channels is shown below:
Stereo left
Stereo right
Centre
Surround left
LF channel
Clips channel 1
Clips channel 2
Clips channel 3
Clips channel 6
Clips channel 4
Clips channel 5
Surround right
To Next Page
Loading...