12
Kaleido-X16 Installation
Air Filter
1
Air Filter
Cooling air drawn into the Kaleido-X16 frame by the ventilating fans passes through a filter located behind
a grille in the front cover of the frame.
CompactFlash
In order to boot the CPU, you must ensure the appropriate CompactFlash (CF) card is properly inserted in
the CF slot (accessible from the front of the Kaleido-X16 frame). The CF card contains the operating system
required for a system boot.
Signalling
See also: For more information about cleaning the air filter, see “Cleaning the Air Filter” on page 25.
See also: For more information about starting the Kaleido-X16, see the “Setting up the Kaleido-X16” chapter in
the Kaleido-X16 Quick Start Guide.
IMPORTANT: The Kaleido-X16-D model supports two Heads while the Kaleido-X16-S supports one Head. For
details about the difference in connector support on the two models, see “Kaleido-X16-D” on
page 3 and “Kaleido-X16-S” on page 4.
PSU fan on front of PSU A
CF slot on front of Kaleido-X16 frame
To Next Page
Loading...
