18
Setting Up the Kaleido-X16 Multi-Viewer
Changing an IP Address on Windows 7
2
5. Type an IP address in the same range as the default IP address of the Kaleido-X16 frame. For example,
if the IP address of the Kaleido-X16 frame is 10.0.3.70, then the IP address of your client PC could be
10.0.3.123. If you are unsure, contact your network administrator.
6. Type a subnet mask in the same range as that of the Kaleido-X16 frame.
7. Click OK.
8. In Local Area Connection Properties, click OK.
Changing an IP Address on Windows 7
To change the IP address of a client PC that has Windows 7:
1. Click the Start button, and then click Control Panel. In the search box, type “adapter”, and then, under
Network and Sharing Center, click View network connections.
2. In Network Connections, right-click Local Area Connection, and then click Properties. If the system
prompts you for an administrator password or confirmation, type the password or provide
confirmation.
The Local Area Connection Properties window opens.
3. On the Networking tab, under This connection uses the following items, click Internet Protocol
Version 4 (TCP/IPv4), and then click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
4. On the General tab, click Use the following IP address.
5. Type an IP address in the same range as the default IP address of the multi-viewer. For example, if the
IP address of the multi-viewer is 10.0.3.70, then the IP address of your client PC could be 10.0.3.123.
If you are unsure, contact your network administrator.
6. Type a subnet mask in the same range as that of the multi-viewer.
7. Click OK.
8. In Local Area Connection Properties, click OK.
Step 3: XEdit Installation
The Kaleido-X Layout Editor (XEdit) is used to create layouts and configure the Kaleido-X16 multi-viewer.
When the computer with XEdit is connected to the Kaleido-X16 through a TCP/IP network, you can use
XEdit to modify layouts and settings directly on the multi-viewer, or you can work locally on the computer
and then export your changes to the multi-viewer.
XEdit is not provided as a standalone application. You download the application to your client PC or laptop
directly from the multi-viewer.
To Next Page
Loading...
