96
Managing Kaleido-X Systems
Configuring the System Representation
5 Repeat this procedure until you have added all required ASM transport streams to your
system configuration.
6On the File menu, click Save. Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Adding a Unicast Transport Stream
To add a unicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then click the appropriate network adapter
element, for the stream you wish to add:
• NETWORK ADAPTER 2 for a high-bitrate stream;
•alternatively, NETWORK ADAPTER 3, 4, 5, or 6, for a high-bitrate stream, in the case
of a four-port or six-port Kaleido-IP model;
• optionally, NETWORK ADAPTER 1 for a low-bitrate stream.
The supported stream types (Multicast, Unicast) are listed in the Tools pane.
Note: Under the network adapter elements, transport streams are listed in
alphabetical order.
Transport stream
Program
Elementary stream (audio)
Elementary stream (video)
Group address
Protocol
Port number (or range)
To Next Page
Loading...
