99
Kaleido-X
User’s Manual
The Kaleido-IP establishes a connection with the selected stream. All programs that are
part of the stream, and the elementary streams included in these programs,
automatically appear under the transport stream element in the System list.
Removing Transport Streams
To remove transport streams from your system configuration
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the multicast transport
stream you wish to remove.
3 If you wish to remove multiple transport streams in a single operation, then extend
your selection by using the standard Shift+click or Ctrl+click keyboard shortcuts.
4 Right-click the selection, and then click Remove.
Notes
• The Kaleido-X software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ ' and ".
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
To Next Page
Loading...
