102
Managing Kaleido-X Systems
Restoring Factory Defaults
2 If you wish to populate multiple slots in a single operation, extend your selection to
other slots of the same type by using the standard Shift+click or Ctrl+click keyboard
shortcuts.
3 Right-click your selection and then click Insert [card type] on the shortcut menu.
Alternatively drag the card from the equipment library onto the empty card slot.
The slot name is now appended with the card type: for example, INPUT D - KXI-16.
Restoring Factory Defaults
A number of predefined rooms and layouts are available on the multiviewer itself when you
first receive your system. However, if you start configuring a system in XEdit by using the
default database XEdit creates for the multiviewer model you selected, you will need to
create your own rooms and layouts. The default XEdit-created databases have a number of
pre-populated cards and logical sources, as well as one predefined RCP user (“Admin”), but
they do not include rooms or layouts.
See Restoring the XEdit Factory Defaults for a
Multiviewer on page 103.
Sample factory-default databases with rooms and layouts are available on the DVD that
shipped with your system, and from Miranda’s support portal. If you wish to use default
rooms and layouts as a starting point for building your system, you can either import the
factory-default database from the multiviewer (see
Restoring Factory Defaults From a
Note: With the current version of XEdit, dragging a card from the
equipment library is only supported in the case of a single-card selection.
To Next Page
Loading...
