105
Kaleido-X
User’s Manual
A message appears, prompting you to confirm your intention.
2Click Ye s.
XEdit then prompts you to confirm that you want to restore the factory defaults for the
multiviewer model you chose.
3Click Ye s.
The selected multiviewer model appears in the System hierarchical list.
4On the File menu, click Save.
Restoring Factory Defaults From a Specific Multiviewer
To restore factory defaults from a multiviewer
1On the Configure menu, point to Database, and then click Import.
A window appears, prompting you for the IP address of the multiviewer whose factory-
default database you wish to import.
Kaleido-X (7RU) Kaleido-X (7RU)
Kaleido-X (14RU) Two Kaleido-X (7RU) frames, with expansion cards
Kaleido-Modular Any KMV-3901/3911, Kaleido-XQUAD, or Kaleido-XQUAD-DUAL
Kaleido-MX Any Kaleido-MX, or Kaleido-Modular-X
Kaleido-IP-2 Kaleido-IP X100, or Kaleido-IP X300 with two network adapters
Kaleido-IP-4 Kaleido-IP X300 with four network adapters
Kaleido-IP-6 Kaleido-IP X300 with six network adapters
Note: See Importing a Database on page 70, for details.
Select... To represent a...
To Next Page
Loading...
