131
Kaleido-X
User’s Manual
4In the Properties tab, click the Switch field selection box, and then select the
appropriate field value from the list.
Calibrating SDI Signal Reclocking
To calibrate reclocking of a router module’s output signal
1 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar.
A hierarchical list representing the current system appears.
2 In the list, expand the multiviewer you wish to calibrate.
3 Expand the appropriate router output, and then click SDI output reclocking.
4In the Properties tab, click the SDI output reclocking box, and then select ON or OFF
from the list.
To Next Page
Loading...
