174
Setting Up Rooms
Managing Rooms
Creating Rooms
To create a room
1Click the Rooms tab in the main window.
2On the File menu, click New.
An empty room with a black background appears in the main window.
3 Add the appropriate number of displays and configure them to match your actual
installations.
See Adding Displays on page 176, and Configuring Displays, on page 180.
4 Optionally add full screen zones (see See Adding Full Screen Zones on page 180).
5On the File menu, click Save.
The Save Room window appears.
6 Type a name for the new room, and then click Save.
Opening Rooms
To open an existing room
1Click the Rooms tab in the main window.
2On the File menu, click Open.
The Open Room window appears.
Notes
• A room name cannot exceed 7 characters.
• A room can only be saved once every display has been assigned an output
head (see
Adding Displays, on page 176).
• In a cluster system, each room must have a unique name across the whole
system. XEdit will not let you use a name if there is already a room with this
name associated with one of the multiviewers within the cluster.
• In a cluster system, if one of the member multiviewers becomes
unavailable while you were configuring a room, then XEdit will not let you
save the room. If you wish to save the room anyway, first remove any
unavailable multiviewer from the cluster.
To Next Page
Loading...
