176
Setting Up Rooms
Managing Rooms
Closing Rooms
To close a room
•On the File menu, click Close. Alternatively, click the Close button on the toolbar.
Deleting Rooms
Before deleting a room, make sure there are no layouts left for that room in your system
configuration. If there are still layouts for this room, then XEdit will issue an error message
and prevent you from deleting the room.
See Deleting Layouts on page 205.
To delete a room
1 Open the room you wish to delete (see Opening Rooms, on page 174).
2On the File menu, click Delete. Alternatively, click the Delete button on the toolbar.
The system prompts you to confirm.
3Click Ye s to proceed.
The room is removed from your system configuration.
Adding Displays
To add a display to a room
1 Select a display from the display library and drag it onto the room area.
Alternatively, click the Display button on the toolbar, and then click the room area to
add a custom display.
• In the case of a cluster system, it is possible to view a room configuration
in offline mode, but any changes must be made in online mode.
Notes (continued)
To Next Page
Loading...
