216
Creating Layouts
Configuring Video Monitors
To add a free-form safe area image to a video monitor
1 Open an existing layout, or create a new one.
2 Click an existing video monitor in the layout, or create a new one.
3In the Properties pane, select the Show markers check box, under Safe area markers.
4Click the Custom safe zone image box.
A button appears inside the box.
5 Click the button to open the Select Image window.
• To ensure that the aspect ratio of the imported image is preserved, you
should position the graphics on a fully transparent background with the
same aspect ratio as the video monitor on which it is to appear.
• In the case of a cascade system, XEdit must be connected to the
multiviewer that will provide the source for the corresponding video
monitor. A monitor that is not associated with a specific source is displayed
by the system closest to the display.
Notes (continued)
To Next Page
Loading...
