220
Creating Layouts
Configuring Video Monitors
4In the Custom Overscan window, specify new percentage values for Left, Right, Top,
and Bottom overscan margins, then click OK.
When the layout is loaded on the Kaleido-X, the updated overscan/underscan
properties become available.
Configuring Automatic Aspect Ratios
To slave a video monitor to the input signal aspect ratio
1 Click the video monitor for which you wish to apply automatic format detection.
2In the Properties pane, select the appropriate value from the Automatic Aspect Ratio
list.
Note: Generally avoid exceeding 15% in any direction. You can click
Restore defaults to enter the default overscan values (left, right, top and
bottom
= 5%). Safe title area and aspect ratio markers follow the video
signal (e.g. if the safe title is within 5% of top, left, right and bottom, then
when the video is in default overscan mode, the safe title will not appear).
Note: Double-click the video monitor, if is part of a composite monitor.
To Next Page
Loading...
