16
Getting Started
Verifying your System Configuration
The other system-related statuses should all be normal, although if you left the door
open when checking a GPI/Genlock card’s LEDs, you may see a warning under Chassis
Door Open Status.
If you have a Kaleido-X (4RU) without a KXA-GPI-GEN card, then you will find the fan
and power supply statuses listed with the master output card’s information.
Note: The KXA-GPI-GEN card, with support for GPI, is standard on the
Kaleido-X (7RU), and optional for the Kaleido-X (4RU). GPI support is built-in
on the Kaleido-X16, and Kaleido-Modular multiviewers. Not available on the
Kaleido-IP.
Temperatures
PSU statuses
Fan statuses
Temperatures
PSU statuses
Fan statuses
To Next Page
Loading...
