237
Kaleido-X
User’s Manual
10 Click Save to save your new timer and close the Timer Editor window.
11 Under the Channels/Sources tab, create a new logical source to associate with the
timer, and name it.
IMPORTANT
Before setting a timer’s start time in XEdit, review the following:
• If the selected time code reference includes time zone
information, then make sure that the PC or laptop that has XEdit
is configured for the same time zone.
• If the selected time code reference does not include time zone
information, or you chose to bind the timer to the multiviewer’s
internal clock, then the multiviewer's system time will apply.
• In the case of a Kaleido-X or Kaleido-X16 multiviewer model,
make sure the time zone settings are the same, on the
multiviewer, and on the PC or laptop that has XEdit.
• In the case of a KMV-3901/3911, when you save or export the
timer to the multiviewer, XEdit automatically converts the
start time you specified to UTC, based on your computer’s time
zone settings.
Note: In the case of a Kaleido-X or Kaleido-X16 multiviewer
model, the system's time zone is configured in XAdmin. In the case
of a KMV-3901/3911, time is always based on UTC. On a Windows
PC or laptop, the time zone is configured in the Date and Time
control panel.
To Next Page
Loading...
