254
Creating Layouts
Configuring Clocks
To insert a clock logo
1In the Properties pane, click the Logo box, under Appearance.
2 Click the button that appeared at the end of the box.
The Select Image window appears.
3 If the logo you wish to use is not already listed in Select Image, then click the Open
button to open the Browse Image window. Locate the image, select it, and then click
Open.
The image is imported into the database.
4In Select image, select the logo you wish to use from the Image selection list, and then
click OK.
The logo appears on the clock background.
To Next Page
Loading...
