302
Routers & Kaleido-X
Detailed Directions
Q: What are the three different Router Controller items (i.e. Network Compact and the
two Pro-Bel items) in the Equipment library?
A: They are all used for controlling either the multiviewer’s internal router, or any logical
router.
4
The only difference is the protocol used to communicate with the multiviewer.
Q: My internal router card shows up in the Routers list in XEdit as “OPTION A (Video
120
× 48)”. Does this mean it has 120 inputs and 48 outputs?
A: No. Each card can route up to 96 inputs to 24 physical outputs, and so has an actual
size of 96
× 24. “120 × 48 “refers to the size of the router card when including other
internal connections that are used for router expansion.
Detailed Directions
Importing Router Configurations from an NV9000 System Controller
XEdit can import router configurations from an NV9000 system controller and share its
KX
Router logical router’s configuration with iControl Application Servers and RCP-200
Advanced Remote Control Panels. Refer to the “Component Compatibility” section of the
Kaleido-X Release Notes for related version information.
Although it is possible to partly configure your system by using XEdit in offline mode, you
must work in online mode, to import NV9000 router configurations (see
Using XEdit Online,
on page 67).
To import external router configurations from an NV9000 system controller
1 In XEdit’s main window, click the System tab, and then click Router configurations on
the second-level tab bar.
2In the Tools pane, click the Physical routers folder.
3Click Import NVISION config.
The Import Configuration window appears.
4.Controlling a logical router from an upstream router control device or application is supported since
version 3.00 of the Kaleido-X software.
Note: The current version of the Kaleido-X software does not officially
support aliases. If you wish to include aliases from an NV9000 router
configuration within your multiviewer configuration, please contact
Technical Support (see
Contact Us, on page 453).
To Next Page
Loading...
