339
Kaleido-X
User’s Manual
and interpret serial tally information from peripheral devices. The illustrations, options or
properties shown below may vary, depending on your actual system.
To configure a Kalypso, Andromeda, Serial to TCP/IP Dispatcher, or TSL serial device
1 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar. The main pane displays the System hierarchical list, and the
Tools pane displays the equipment library when the root of the System list is selected.
2 Drag the appropriate peripheral device from the equipment library onto the root of the
System hierarchical list. Alternatively, right-click the list root, and then click the
appropriate peripheral device on the shortcut menu.
A window appears, prompting you for a device identifier.
3 Type a name for the peripheral device, and then click OK.
4Click the Interconnects tab.
5 Click the multiviewer icon and hold the mouse button, while dragging the pointer
towards the peripheral device icon.
A line representing the connection between the multiviewer and the device appears.
Connection between the multiviewer and the device (example using Kalypso, same for all
devices)
6 Click the connection line between the multiviewer and the device.
7In the Properties pane, select the appropriate element from the RS-422
communication port list.
To Next Page
Loading...
