347
Kaleido-X
User’s Manual
Setting Up a Multiviewer to Interface with a Sony Production Switcher
To set up the multiviewer to interface with the Sony production switcher
1Open XEdit.
2 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar. The main pane displays the System hierarchical list, and the
Tools pane displays the equipment library when the root of the System list is selected.
3Drag the Sony production switcher device from the equipment library onto the root of
the System hierarchical list. Alternatively, right-click the list root, and then click Insert
Sony serial tally on the shortcut menu.
A window appears, prompting you for a device identifier.
4 Type the name of the Sony production switcher, and then click OK.
5Click the Interconnects tab.
6 Position the pointer over the multiviewer icon, then click and drag towards the Sony
production switcher icon.
A line representing the connection between the multiviewer and the device appears.
Connection between the multiviewer and the device
7 Click the connection line between the multiviewer and the device.
8In the Properties pane, select the appropriate element from the RS-422
communication port list.
9In the Interconnects tab, click the Sony production switcher icon.
To Next Page
Loading...
