411
Kaleido-X
User’s Manual
Enabling Options
To enable options on a multiviewer
1 From a workstation on the same subnet, open a Web browser window and type the IP
address of the multiviewer in the address bar.
11
The Kaleido-X home page appears.
2 Click the XAdmin button.
The XAdmin Status and Options page appears.
11.The multiviewer must have Kaleido-X software version 2.10 or later.
Firefox users:
If you see a security warning instead of the home page, then refer to
Registering your Multiviewer's Security Credentials with your Browser, on
page 421.
To Next Page
Loading...
